Add to Cart
HXE-24DTA Copper fine wire drawing machine with annealer
I. Application
HXE-24DTA Copper fine wire drawing machine with annealer is used to draw and anneal single bare copper wire from 0.8mm-1.6mm to 0.1mm-0.6mm.
II. Main Technical parameters
1. Usage: Copper wire drawing and annealing
2. Inlet diameter: 0.8mm-1.6mm
3. Outlet diameter: 0.1mm-0.6mm
4. Max. mechanical speed: 2000m/min
5. Dies: 22 dies
6. Slip ratio: 15%, Finished capstan slip ratio: 8%
7. Main motor: AC 3 Phase 18.5KW, Inverter control
8. Annealer motor: AC 3 Phase 3.7KW, Inverter control
9. Take up motor: AC 3 Phase 3.7KW, Inverter control
10. Power transmission: Timing belts+Triangle belts+Flat belts
11. Take up capacity: 50kg for diameter 300mm iron spool (Customize)
12. Spool size: Diameter 300mm/Max (Customize), 250mm-127mm spooler is totally ok
13. Capstans: Ceramic plasma, Drawing capstan 242mm, Final capstan 207mm
14. Capstan lubrication: Water pipe spray
15. Traversing: 110W synchronous motor,transmission by flat belts.
16. Brake: 20KG-M Electromagnetic brake
17. Air pressure: 4-6kg/cm2
18. Annealing pulley: Diameter 120mm
19. Annealing volt: DC60V
20. Annealing current: DC800A
21. Annealing motor power: 48KVA
22. Tension control: Annealer & Spooler Tension control by Swing arms, Air pressure auto adjust.
23. Machine dimension(L*W*H): 3500mm*1600mm*2200mm, Machine weight:3200kg
24. Power source: 415V, 50Hz(Customized)
III. Components
Name | Quantity |
1. Pay-off stands | 1 set |
2. HXE-24DTA main drawing machine | 1 set |
3. Electrical cabinet | 1 set |
4. Steam generator | Not available |
5. Lubrication tank and Pump | 1 set |
6. Bobbin Loading&Unloading trolley | 1 set |
7. Spare part for one year | 1 set |
8. Others |
IV. Working environment
4-1. Altitude less than 1000m.
4-2. Temperature-10℃-40℃
4-3. Relative temperature less than 85% (25℃)
4-4. Power source 380V, 50Hz, can be customized
4-5. Air capacity 0.3m³/min
V. Shipping & Installation
5-1. Shipping
There are two lifting rings on the drawing machine, four on then annealing machine.
5-2. Installation (See attached drawing)
According to the drawing, make the foundation.
When machine is in position, install bolts and adjust the center line.
When concrete is drying, adjust center line again and fix the bolts.
5-3. Adjust
Before adjusting, check and clean all parts.
VI. Advantage and after-sale service
A: Advantage
(1). HENGXIE has some world famous parts suppliers, has special lubrication system for the gears and bearing.
(2). Body and other key components and parts are produced by our own factory , quality is reliable.
(3). DC. three-section annealing
(4). Our company’s developing process in more than 10 years.
B: After-self service
Our company for all machine product, since the shipment date, our company free after sale maintenance service guarantee period is:
(1) 1 year for mechanical part.
(2) 6 month for electrical part.
Under these situation mentioned, the Seller will not take responsibility, but if the Buyer agree, will charge fees accordingly to repair the machine.
A. Due to wrong operation while shipping.
B. Due to Buyer`s wrong preparation that may cause damage to the machine.
C. Due to Buyer`s wrong operation that may cause damage to the machine.
D. Not in the consuming part list.
E. After agreement are made for the shipping, for any damage, Buyer should inform Seller in letter form to repair in seven days, If beyond the dare, Seller shall take no responsibility.
F. For any other failures due to acts of God (such as lightning, typhoon, earthquake, riots, war, fire or flood) and other factors that will cause damage, Seller shall take no responsibility.
G. Seller guarantee provide long term support regarding the parts and teach. After warranty, will charge accordingly.