Suzhou Hengxie Machinery Co., Ltd
Suzhou Hengxie Machinery Co., Ltd
Add to Cart
HXE-450/13DL Aluminium rod breakdown machine is used to draw single bare aluminium wire from 9.5mm to 1.7mm-4.2mm.The drawing capstans are arranged in a line that are able to work continuously with drawing speed and electrical control can be matched with each other.
II. Compositions of equipment
| Name | Quantity |
| 1. Cantilever Pay-off shelf | 1 set |
| 2. HXE-450/13DL Main drawing machine | 1 set |
| 3. HXE-180 Tension controller | 1 set |
| 4. HXE-SX630 Double spoolers | 1 set |
| 5. Electrical cabinet | 1 set |
| 6. Operation panel | 1 set |
| 7. Gear Oil system (Pump+Cooler) | 1 set |
| 8. Spare parts | 1 set |
III. Main technical parameters
| 1. Inlet | 9.5mm (Inlet wire straightening function is provided) |
| 2. Outlet | 1.7mm-4.2mm (Final wire cleaning function is provided) |
| 3. Diameter of capstans | 450mm |
| 4. Speed | 1500m/min, capacity say 1.7mm, 540kg per hour |
| 5. Slip ratio | 1.4-1.2 decrease |
| 6. Quantity of capstan | 13 |
| 7. Capstan | Tungsten carbide (With wire threading function) |
| 8. Quick dies change | Available / Require less dies |
| 9. Main motor | DC250KW, with DC Controller |
| 10. Fix speed motor | DC75KW, with DC Controller |
| 11. Gear | Changeable |
| 12. Noises of machine | ≤85 db |
| 13. Protection cover | Motor transmission cover installed |
| 14. Others | Cooler for Gear oil is provided |
| 15. Others | All main pipes are provided |
| 16. Others Gear oil recycling complete system is provided, including: Pump, Gear oil tank, Pipes, Oil Pressure Gauge, Signal wire. When lack of oil, machine will auto stop. | |
| 17. Others Cooler for Lubrication oil , no need. You need prepare one Underground Tank for Lubrication Oil recycle. | |
IV. After-sale service
Warranty: after shipping, machine part one year, electrical parts six months
Under these situation mentioned, the Seller will not take responsibility, but if the Buyer agree, will charge fees accordingly to repair the machine.
A. Due to wrong operation while shipping.
B. Due to Buyer`s wrong preparation that may cause damage to the machine.
C. Due to Buyer`s wrong operation that may cause damage to the machine.
D. Not in the consuming part list.
E. After agreement are made for the shipping, for any damage, Buyer should inform Seller in letter form to repair in seven days, If beyond the dare, Seller shall take no responsibility.
F. For any other failures due to acts of God (such as lightning, typhoon, earthquake, riots, war, fire or flood) and other factors that will cause damage, Seller shall take no responsibility.Seller guarantee provide long term support regarding the parts and teach. After warranty, will charge accordingly.
V. Notes
When installation, make connect the ground wire.
When working, do not open the doors.
Do not touch the wire when annealing.
Regular check Coolant water, Steam, Compressed air.
VI. Working environment
Altitude less than 1000m.
Temperature: －10℃－40℃
Relative temperature less than 85% (25℃)
Power source 380V, 50Hz, can be customized
