Suzhou Hengxie Machinery Co., Ltd
Suzhou Hengxie Machinery Co., Ltd
Add to Cart
HXE-13DT Large-intermediate copper wire drawing machine with annealer
I. Quick Discription
Large-intermediate copper wire drawing machine with annealer is used to drawing and annealing single bare copper wire from 3.0mm-3.5mm to 0.8mm-2.8mm
II. Composition
1. Pay-off shelf
2. HXE-13DT Copper wire drawing machine
3. HXE-TH350 Annealing machine
4. HXE-180 Tension controller
5. HXE-SX630 Double spooler
7. Operation panel
8. Drawing control cabinet
9. Annealing control cabinet
III. Main technical parameters
| Machine type | HXE-9DT | HXE-13DT |
| Control system | Traditional analog type/digital control with production record | |
| Outlet diameter(mm) | 1.0-2.8 | 0.8-2.8 |
| Inlet diameter(mm) | 3.0-3.5 | 3.0-3.5 |
| Max.line speed | 900 | 1000 |
| Die number | 9 | 13 |
| Slip ratio | 19.6%+16.4% | |
| Frame | Welded by steel plate | |
| Capstan | Tungsten | |
| Max capstan diameter | 280mm | |
| Fix speed capstan diameter | 280mm | |
| Spooler bobbin size | 400-630mm | |
| Bobbin loading&unloading type | Double end thimbles | |
| Max.loading capacity | 500KG/MAX | |
| Annealing method | DC.Three-section annealing | |
| Main motor | AC45KW | |
| Spool motor | AC11KW*2 | |
| Max.annealing current | DC3000A | |
| Max.annealing voltage | DC60V | |
| Annealing power | 180KVA | |
| Steam quantity | 18kg/h | |
| Cooling water capacity | 650L/min | |
| Compressed air capacity | 0.4~0.6Mpa,50L/min | |
| Power source | 380V 50/60HZ | |
| Dimension | 13300*3500*3400 | |
| Weight | 8500KG | 8500KG |
IV. Shipping & Installation
Shipping
There are two lifting rings on the drawing machine, four on then annealing machine.
Installation (See attached drawing)
According to the drawing, make the foundation.
When machine is in position, install bolts and adjust the center line.
When concrete is drying, adjust center line again and fix the bolts.
Adjust
Before adjusting, check and clean all parts.
V. After-sale service
Our company for all machine product, since the shipment date, our company free after sale maintenance service guarantee period is:
(1) 1 year for mechanical part.
(2) 6 month for electrical part.
Under these situation mentioned, the Seller will not take responsibility, but if the Buyer agree, will charge fees accordingly to repair the machine.
A. Due to wrong operation while shipping.
B. Due to Buyer`s wrong preparation that may cause damage to the machine.
C. Due to Buyer`s wrong operation that may cause damage to the machine.
D. Not in the consuming part list.
E. After agreement are made for the shipping, for any damage, Buyer should inform Seller in letter form to repair in seven days, If beyond the dare, Seller shall take no responsibility.
F. For any other failures due to acts of God (such as lightning, typhoon, earthquake, riots, war, fire or flood) and other factors that will cause damage, Seller shall take no responsibility.
G. Seller guarantee provide long term support regarding the parts and teach. After warranty, will charge accordingly.
