Suzhou Hengxie Machinery Co., Ltd
Suzhou Hengxie Machinery Co., Ltd
Add to Cart
HXE-17DS Intermediate Aluminium wire drawing machine
I. Quick description
HXE-17DS Intermediate Aluminium wire drawing machine is used to draw Aluminium wire and Aluminium alley from 3mm-4mm to 0.4mm-2.5mm.
II. Compositions of equipment
| Name | Quantity |
| 1. Pay off shelf | 1 set |
| 2. HXE-17DS Drawing machine | 1 set |
| 3. HXE-180 Tension controller | 1 set |
| 4. HXE-WS630 Single spooler | 1 set |
| 5. HXE-SX630 Double spoolers | Optional |
| 6. HXE-WF500 Trunk coiler | Optional |
| 7. HXE-WF750 Drop Coiler | Optional |
| 8. Operation panel | 1 set |
| 9. Electrical cabinet | 1 set |
| 10. Gear Oil Cooler + Gear Oil pump | 1 set |
| 11. Spare parts | 1 set |
III. Parameters
1. Inlet diameter: 3mm-4mm; Outlet diameter: 0.4mm-2.5mm
2. Speed: 0.7mm, 1300mpm, 80kg/h; 1.5mm, 1000mpm, 280kg/h; 2.0mm, 800mpm, 400kg/h.
3. Maximum dies number: 17
4. Outer diameter of the dies: 30mm * 15mm thickness 20mm * 10mm thickness
5. Slip ratio of m/c: 18.18%+13.5%
6. Main motor: AC 45KW, with 45KW Inverter.
7. Spooler / Coiler motor: AC 15KW, with 15KW Inverter
8. Loading of capacity: 480kg/max for DIN630mm Iron bobbin
9. Suitable diameter of bobbin: DIN 500mm/630mm
10. Brake: pneumatic brake
11. Capstan: Tungsten carbide
12. Capstan diameter: 254mm
13. Fix speed capstan diameter: 252mm
14. Machine Frame: Casted
15. Power transmission: Triangle belts
16. Machine dimension:3500mm*1200mm*1250mm, Machine weight: 4500kg
IV. Advantage and after-sale service
A: Advantage
(1). HENGXIE has some world famous parts suppliers, has special lubrication system for the gears and bearing.
(2). Body and other key components and parts are produced by our own factory , quality is reliable.
(3). Our company’s developing process in more than 10 years.
B: After-sale service
Our company for all machine product, since the shipment date, our company free after sale maintenance service guarantee period is:
(1) 1 year for mechanical part.
(2) 6 month for electrical part.
V. Working environment
1. Altitude less than 1000m.
2. Temperature: －10℃－40℃
3. Relative temperature less than 85% (25℃)
4. Power source 380V, 50Hz, can be customized
VI. Shipping & Installation
1. Shipping
There are two lifting rings on the drawing machine, four on then annealing machine.
2. Installation (See attached drawing)
According to the drawing, make the foundation.
When machine is in position, install bolts and adjust the center line.
When concrete is drying, adjust center line again and fix the bolts.
3. Adjust
Before adjusting, check and clean all parts.
