Suzhou Hengxie Machinery Co., Ltd
Suzhou Hengxie Machinery Co., Ltd
Add to Cart
HXE-450/13DL Aluminium wire rod breakdown machine
I. Application
HXE-450/13DL Aluminium rod breakdown machine is used to draw single bare aluminium wire from 9.5mm to 1.7mm-4.2mm.The drawing capstans are arranged in a line that are able to work continuously with drawing speed and electrical control can be matched with each other.
II. Compositions of equipment
| Name | Quantity |
| 1. Cantilever Pay-off shelf | 1 set |
| 2. HXE-450/13DL Main drawing machine | 1 set |
| 3. HXE-180 Tension controller | 1 set |
| 4. HXE-SX630 Double spoolers | 1 set |
| 5. Electrical cabinet | 1 set |
| 6. Operation panel | 1 set |
| 7. Gear Oil system (Pump+Cooler) | 1 set |
| 8. Spare parts | 1 set |
III. Main technical parameters
| 1. Inlet | 9.5mm (Inlet wire straightening function is provided) |
| 2. Outlet | 1.7mm-4.2mm (Final wire cleaning function is provided) |
| 3. Diameter of capstans | 450mm |
| 4. Speed | 1500m/min, capacity say 1.7mm, 540kg per hour |
| 5. Slip ratio | 1.4-1.2 decrease |
| 6. Quantity of capstan | 13 |
| 7. Capstan | Tungsten carbide (With wire threading function) |
| 8. Quick dies change | Available / Require less dies |
| 9. Main motor | DC250KW, with DC Controller |
| 10. Fix speed motor | DC75KW, with DC Controller |
| 11. Gear | Changeable |
| 12. Noises of machine | ≤85 db |
| 13. Protection cover | Motor transmission cover installed |
| 14. Others | Cooler for Gear oil is provided |
| 15. Others | All main pipes are provided |
| 16. Others Gear oil recycling complete system is provided, including: Pump, Gear oil tank, Pipes, Oil Pressure Gauge, Signal wire. When lack of oil, machine will auto stop. | |
| 17. Others Cooler for Lubrication oil , no need. You need prepare one Underground Tank for Lubrication Oil recycle. | |
IV. Operation details
1. Open the power switch of the electrical cabinet.
2. Use the Foot-switch while make the wire through the dies.
3. After make the wire through some dies, should open the lubrication oil to make sure no wire break.
4. Make the wire through the take-up part well arranged, then close the door.
5. According to the user`s require to set the Length-counter, adjust the balance arm.
6. If wire breaks, will stop automatically, and the Fault Indicator light will open.
After connect the wire, press the Fault Reset button(Yellow button) and the On button (Green button), to run the machine again.
7. Press Emergency Stop button(Red button) to shut down the machine immediately.
After solve, press the button again to run the machine.
8. After set the Length-counter, the machine will stop automatically when reach the length set.
After change the Spool, please press the Length Reset button(Yellow button) and the Spool Reset button(Yellow button) to run the machine again.
9. After the machine stop(no running at all), then switch the Pump switch to stop the lubrication.
V. After-sale service
Warranty: after shipping, machine part one year, electrical parts six months
Under these situation mentioned, the Seller will not take responsibility, but if the Buyer agree, will charge fees accordingly to repair the machine.
A. Due to wrong operation while shipping.
B. Due to Buyer`s wrong preparation that may cause damage to the machine.
C. Due to Buyer`s wrong operation that may cause damage to the machine.
D. Not in the consuming part list.
E. After agreement are made for the shipping, for any damage, Buyer should inform Seller in letter form to repair in seven days, If beyond the dare, Seller shall take no responsibility.
F. For any other failures due to acts of God (such as lightning, typhoon, earthquake, riots, war, fire or flood) and other factors that will cause damage, Seller shall take no responsibility.Seller guarantee provide long term support regarding the parts and teach. After warranty, will charge accordingly.
