Suzhou Hengxie Machinery Co., Ltd
Suzhou Hengxie Machinery Co., Ltd
Add to Cart
HXE-24DS Fine aluminium wire drawing machine
I. Application
24DS Fine aluminium wire drawing machine is used to drawing aluminium wire from 1.2mm-2.5mm to 0.1mm-0.4mm.
II. Components
| Name | Quantity |
| 1. Pay-off shelf | 1 set |
| 2. HXE-24DS Fine aluminium wire drawing machine | 1 set |
| 3. Bobbin Unloading device | 1 set |
| 4. Spare parts | As per List |
| 5. Operation manual |
III. Specifications
1. Inlet size: 1.2mm-2.5mm
2. Outlet size: 0.1mm-0.4mm
3. Speed: 2500mpm
4. Dies number: 24
5. Slip ratio (Area reduction) : 13%+ 8%
6. Wire drawing mode: vertical-mode and 4 axes
7. Driver: by dual Inverters control, Brand: Inovance,Chinese famous brand, 15kw+3.7kw.
8. Main motor: 15KW AC 3 phase motor
9. Spooler motor: 3.7KW AC 3 phase motor
10. Motor brand: Wan Nan motor, China classical brand
11. Capstan: Ceramic plasma
12. Max capstan diameter: 242mm
13. Max fix speed capstan: 207mm
14. Machine structure: Cast iron
15. Reverse system: PID synchronous control spool
16. Transmission: Flat belts
17. Pay-off method: Over-head
18. Tension control: Weight balance by swing arm
19. Lubrication type: spray, Grade 2.5%-3%, Capacity 40L/min,
20. Bobbin size: 300mm, material steel, 17kg.
21. Take up: Shaft type
22. Bobbin capacity: 50-60kg/max
23. Brake: Magnetic brake
24. Power source: Customize
25. Machine dimension: L2050mm*W1600mm*H1590mm, Machine weight: 2500KG
IV. Advantage and after-sale service
A: Advantage
(1). HENGXIE has some world famous parts suppliers, has special lubrication system for the gears and bearing.
(2). Body and other key components and parts are produced by our own factory , quality is reliable.
(3). Our company’s developing process in more than 10 years.
B: After-sale service
Our company for all machine product, since the shipment date, our company free after sale maintenance service guarantee period is:
(1) 1 year for mechanical part.
(2) 6 month for electrical part.
Under these situation mentioned, the Seller will not take responsibility, but if the Buyer agree, will charge fees accordingly to repair the machine.
A. Due to wrong operation while shipping.
B. Due to Buyer`s wrong preparation that may cause damage to the machine.
C. Due to Buyer`s wrong operation that may cause damage to the machine.
D. Not in the consuming part list.
E. After agreement are made for the shipping, for any damage, Buyer should inform Seller in letter form to repair in seven days, If beyond the dare, Seller shall take no responsibility.
F. For any other failures due to acts of God (such as lightning, typhoon, earthquake, riots, war, fire or flood) and other factors that will cause damage, Seller shall take no responsibility.
G. Seller guarantee provide long term support regarding the parts and teach. After warranty, will charge accordingly.
V. Operating order
(1) Opening the unfused switch,the fan start working.
(2) Power switch “ON”,next step is pointing wire through foot switch.
(3) Opening the lubrication liquid switch after part of the wrie went through the dies, let the lubrication liquid spray on the capstans and dies evenly.
(4) The copper wires pass through the pilot round, distribute round, tension lever, arrange round, finally wind on the wind drum, close the stainless steel fold board, and switch on the oil valve for drawing.
(5) Base on the line diameter set up the stretch speed and measure length→reset measure meter→adjust the buffer lever to horizontal position, press the start button, start normal operation
(6) Adjust the width of winding displacement, check again if the oil valve is opened and the oil sprays the drawing area.
(7) The machine will stop atuomactically if wire breaks.The brake light will become red Then repeating above sequence to resume operation.
(8) When the wind bobbin is full, the machine will auto brake, unload the full bobbin and change to another bobbin, wind up then restart the machine.
(9) In case emergency, press the red “emergency stop” button to stop the machine.
(10) Stopping the machine
a. Keep the lubricating oil flow while stop the machine.
b. the wire won’t break if press the stop button of the machine,and the the machine will stops in 30 seconds.
c. Press the start button the machine will restart again.
(11) Attention: If the wire breaks and restart the machine with unchanged bobbin,pls don’t press”meters reset” button. otherwise the machine wouldn't auto stop when the bobbin is full.
