Suzhou Hengxie Machinery Co., Ltd
Suzhou Hengxie Machinery Co., Ltd
Add to Cart
HXE-24DWT Copper small wire drawing machine with annealer
I. Quick Description
HXE-24DWT Copper small wire drawing machine with annealer is used to draw and anneal single bare copper wire from 0.8mm-1.6mm to 0.1mm-0.6mm.
II. Components
| Name | Quantity |
| 1. Pay-off stands | 1 set |
| 2. HXE-24DWT main drawing machine | 1 set |
| 3. Electrical cabinet | 1 set |
| 4. Steam generator | 1 set |
| 5. Lubrication tank and Pump | 1 set |
| 6. Bobbin Loading&Unloading trolley | 1 set |
| 7. Spare part for one year | 1 set |
| 8. Others |
III. Main Technical parameters
1. Usage: Copper wire drawing and annealing
2. Inlet diameter: 0.8mm-1.6mm
3. Outlet diameter: 0.1mm-0.6mm
4. Max. mechanical speed: 2000m/min, capacity say 0.2mm, 1400m/min, 23kg per hour.
5. Dies: 24 dies
6. Slip ratio: 15%, Finished capstan slip ratio: 8%
7. Main motor: AC 3 Phase 22KW, Inverter control
8. Annealer motor: AC 3 Phase 3.7KW, Inverter control
9. Take up motor: AC 3 Phase 3.7KW, Inverter control
10. Take up capacity: 50kg for diameter 300mm iron spool (Customize)
11. Spool size: Diameter 300mm/Max (Customize)
12. Capstans: Ceramic plasma, Drawing capstan 316mm, Final capstan 268mm
13. Capstan lubrication: Water pipe spray
14. Traversing: 110W synchronous motor,transmission by timing belts.
15. Brake: 20KG-M Electromagnetic brake
16. Air pressure: 4-6kg/cm2
17. Annealing pulley: Diameter 120mm
18. Annealing volt: DC55V,
19. Annealing current: DC600A ,
20. Annealing motor power: 33KVA
21. Tension control: Annealer & Spooler Tension control by Swing arms, Air pressure auto adjust.
22. Machine dimension(L*W*H): 3500mm*1600mm*2500mm, Machine weight:3200kg
23. Power source: 415V, 50Hz(Customized)
IV. Advantage and after-sale service
A: Advantage
(1). HENGXIE has some world famous parts suppliers, has special lubrication system for the gears and bearing.
(2). Body and other key components and parts are produced by our own factory , quality is reliable.
(3). DC. three-section annealing
(4). Our company’s developing process in more than 10 years.
B: After-self service
Our company for all machine product, since the shipment date, our company free after sale maintenance service guarantee period is:
(1) 1 year for mechanical part.
(2) 6 month for electrical part.
V. Lifting the machine, installation, adjustment
5-1.Lifting, there are four lifting rings to lift.
5-2.Installation, please check the external drawing and foundation drawing of the machine, dig the ground, put the machine in position, check the horizontal level, adjust the ground screws, put concrete slurry, after dry and fix, check the horizontal level again, then fix the machine by the ground screws.
5-3.Adjustment, clean all parts, check all the part no loose.
VI. Preparation before working
6-1. Check all parts lubrication conditions,
6-2. Check drawing lubrication oil, cooling water, steam, air pressure.
6-3. After checking, connect to power, according to the Electrical drawing, use foot switch, to make the machine operating in low speed (under 4m/s), if no Abnormal, then can begin to work.
