Suzhou Hengxie Machinery Co., Ltd
Suzhou Hengxie Machinery Co., Ltd
Add to Cart
HXE-24DT Copper fine wire drawing machine with annealing machine
I. Application
HXE-24DT Copper fine wire drawing machine with annealing machine is used to draw and anneal single bare copper wire from 0.5mm-1.0mm to 0.07mm-0.25mm.
II. Main Technical parameters
1. Usage single bare copper wire drawing and annealing
2. Inlet size 0.5mm-1.0mm
3. Outlet size 0.07mm-0.25mm (Elongation of annealed wire 25% to 32%)
4. Machine speed/max 1800m/min
5. Die number 24, Dies size 25mm×8-10mmT, Slip ratio 13%+8%
6. Wire drawing mode standing-mode and 4axes
7. Drive by Inverter control, Brand Inovance, Most widely used brand in drawing machine
8. Main motor 15KW, Spooler motor 3.7KW, China best brand
9. Annealing voltage DC50V/max, Annealing current DC300A/max, Annealing power 15KVA
10. Annealing method DC Three section annealing
11. Annealing protection will be done by steam protection
12. Capacity of compressed air 0.4-0.6Mpa, 20L/min
13. Demand Water quantity for annealing and coolant 200L/min
14. Machine frame welded by steel plate
15. Transmission Flat belts
16. Capstan Ceramic plasma
17. Lubricating system Pipe Spray
18. Bobbin size 300mm, loading capacity: 50kg/max
19. Bobbin loading & unloading type shaft type
20. Traversing unit 110W synchros motor, width: 270mm/max
21. Tension control by Air pressure tension control (With Weight balance as Backup)
22. Cabinet 0.8m*0.6m*2.0m
23. Machine dimension 2.3m*1.6m*1.9m; Installation Area 3.3m*1.7m+0.8*0.6m
24. Machine weight 3400KG, Cabinet weight 500KG. In total for shipping around 4,000KG.
III. Components
| Name | Quantity | |
| 1. Pay-off shelf | 1 set | |
| 2. HXE-24DT Drawing&Annealing machine | 1 set | |
| 3. Electrical control system | 1 set | |
| 4. Steam generator | 1 set | |
| 5. Lubrication Tank and Pump | Optional | |
| 6. Spare parts | As per List | |
| 7. Operation Manual, Inverter Manual | ||
IV. Working Environment
4-1. Not more than 1000 meters above sea level.
4-2. Temperature －10℃－40℃
4-3. Relative temperature does not exceed 85% (25 ℃)
V. Working Condition
5-1. Maximum air consumption 0.3 cubic meter per minute
5-2. Compress air capacity 225L
5-3. Air pressure 0.4Mpa
5-4. Cooling tank capacity 225L
5-5. Steam capacity 2kg/hour
5-6. Steam pressure 0.2-0.3Mpa
VI. Advantage and after-sale service
A: Advantage
(1). HENGXIE has some world famous parts suppliers, has special lubrication system for the gears and bearing.
(2). Body and other key components and parts are produced by our own factory , quality is reliable.
(3). Our company’s developing process in more than 10 years.
(4). DC. three-section annealing
B: After-self service
Our company for all machine product, since the shipment date, our company free after sale maintenance service guarantee period is:
(1) 1 year for mechanical part.
(2) 6 month for electrical part.
VII. Lifting the machine, installation, adjustment
7-1. Lifting, there are four lifting rings to lift.
7-2. Installation, please check the external drawing and foundation drawing of the machine, dig the ground, put the machine in position, check the horizontal level, adjust the ground screws, put concrete slurry, after dry and fix, check the horizontal level again, then fix the machine by the ground screws.
7-3. Adjustment, clean all parts, check all the part no loose.
