0.15mm-0.4mm Super Fine Wire Drawing Machine 1800mpm 5.5KW AC 3 Phase Motor

HXE-20 Dies Super fine copper wire drawing machine

I. Application

20 Dies super fine copper wire drawing machine is used to draw single bare copper from 0.15mm-0.4mm to 0.05mm-0.12mm.

II. Components

III. Specifications

1. Inlet wire diameter:0.15mm-0.4mm
2. Outlet wire diameter:0.05mm-0.12mm
3. Speed:1800mpm
4. Dies number:20
5. Slip ratio of machine:No.1 -No.19:10.5%, No.20: 6%
6. Wire drawing mode:standing-mode and 4 axes
7. Driver: by dual inverters control, Brand: Inovance,Chinese famous brand, made in Shenzhen.
8. Main motor: 5.5KW AC 3 phase motor
9. Spooler motor:2.2KW AC 3 phase motor
10. Motor brand: Wan Nan motor, China classical brand
11. Capstan:steel with ceramic plasma
12. Max capstan diameter:120mm
13. Max fix speed capstan:120mm
14. Machine structure:cast iron
15. Transmission: by Flat belts
16. Tension control:weight balance by swing arm
17. Spool size: 250mm
18. Take up: shaft type
19. Receiving weight:30kg/max
20. Brake: magnetic brake
21. Drawing Lubrication: pipe spray
22. Power source: (customized)
23. Machine dimension:1900L*1350W*1750H
24. Machine weight: 1900KG

IV. Advantage and after-sale service

A: Advantage

(1). HENGXIE has some world famous parts suppliers, has special lubrication system for the gears and bearing.
(2). Body and other key components and parts are produced by our own factory , quality is reliable.
(3). Our company’s developing process in more than 10 years.

B: After-self service

Our company for all machine product, since the shipment date, our company free after sale maintenance service guarantee period is:
(1) 1 year for mechanical part.
(2) 6 month for electrical part.

Under these situation mentioned, the Seller will not take responsibility, but if the Buyer agree, will charge fees accordingly to repair the machine.
1. Due to wrong operation while shipping.
2. Due to Buyer`s wrong preparation that may cause damage to the machine.
3. Due to Buyer`s wrong operation that may cause damage to the machine.
4. Not in the consuming part list.
5. After agreement are made for the shipping, for any damage, Buyer should inform Seller in letter form to repair in seven days, If beyond the dare, Seller shall take no responsibility.
6. For any other failures due to acts of God (such as lightning, typhoon, earthquake, riots, war, fire or flood) and other factors that will cause damage, Seller shall take no responsibility.
7. Seller guarantee provide long term support regarding the parts and teach. After warranty, will charge accordingly.

V. Operation details

1. Open the power switch of the electrical cabinet.

2. Use the Foot-switch while make the wire through the dies.

3. After make the wire through some dies, should open the lubrication oil to make sure no wire break.

4. Make the wire through the take-up part well arranged, then close the door.

5. According to the user`s require to set the Length-counter, adjust the balance arm.

6. If wire breaks, will stop automatically, and the Fault Indicator light will open.

After connect the wire, press the Fault Reset button(Yellow button) and the On button (Green button), to run the machine again.

7. Press Emergency Stop button(Red button) to shut down the machine immediately.

After solve, press the button again to run the machine.

8. After set the Length-counter, the machine will stop automatically when reach the length set.

After change the Spool, please press the Length Reset button(Yellow button) and the Spool Reset button(Yellow button) to run the machine again.

9. After the machine stop(no running at all), then switch the Pump switch to stop the lubrication.